550
Winter Work Gloves 886
Pay & Collect
Submit your order now and collect your items at Biltema {0} in 2 hours!
Read more about Pay & Collect
Lined synthetic glove in 2 layers for good protection against cold. ¾ dipped in nitrile for durable protection around palms, fingers and knuckles. Good grip in the wet. Suitable for heavy work in construction/installation and automotive industry. Colour: Dayglo yellow. Compliant with EN 388:2003 and EN 511:2006.
Technical Data
This product is CE marked in accordance with the directive on personal protective equipment, 89/686/EEC. It conforms to the directive's requirements for safety, comfort and efficacy.
Approval: This product has been constructed and manufactured in accordance with the following standards:
EN 388:2003 – Gloves for protection against mechanical hazards.
These gloves comply with EN 388, with a performance level according to the table.
a) Number of sander rotations.
b) Resistance to rotating blades (index).
c) Test example torn in opposite directions (Newton).
d) Pressure applied to test example with sharp awl (Newton).
These gloves conform to the requirements for contact cold in accordance with EN 511:2006, with a performance level according to the table (X= property not tested).
Safety information: The gloves protect against physical and mechanical stress, and against cold temperatures. The protection levels are applicable to the palm of a new, unwashed and non-modified glove. Tested in accordance with the relevant standards. The gloves must
Technical Data
- Material, gloves: Polyester Material, lining: Acrylic
- Material, coating: Nitrile
- Material, elastic: Polyester
This product is CE marked in accordance with the directive on personal protective equipment, 89/686/EEC. It conforms to the directive's requirements for safety, comfort and efficacy.
Approval: This product has been constructed and manufactured in accordance with the following standards:
- EN 420:2003+A1:2009 – General requirements for protective gloves.
- EN 388:2003 – Gloves for protection against mechanical hazards.
- EN 511:2006 – Gloves for protection against cold temperatures.
- The product complies with the restriction rules in Annex XVII of the European REACH regulations.
EN 388:2003 – Gloves for protection against mechanical hazards.
These gloves comply with EN 388, with a performance level according to the table.
| Tested property | Level, gloves | Max. level |
|---|---|---|
| Abrasion resistance a) | 3 | 4 |
| Cut resistance b) | 3 | 5 |
| Tear resistance c) | 2 | 4 |
| Puncture resistance d) | 1 | 4 |
| Protection level | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| Abrasion resistance a) | 100 | 500 | 2000 | 8000 | - |
| Cut resistance b) | 1,2 | 2,5 | 5,0 | 10,0 | 20,0 |
| Tear resistance c) | 10 | 25 | 50 | 75 | - |
| Puncture resistance d) | 20 | 60 | 100 | 150 | - |
b) Resistance to rotating blades (index).
c) Test example torn in opposite directions (Newton).
d) Pressure applied to test example with sharp awl (Newton).
These gloves conform to the requirements for contact cold in accordance with EN 511:2006, with a performance level according to the table (X= property not tested).
| Tested property | Level, gloves | Max. level |
|---|---|---|
| Convection cold | X | 4 |
| Contact cold | 2 | 4 |
| Water penetration | X | 1 |
| Protection level | 0 | 1 | 2 | 3 | 4 |
|---|---|---|---|---|---|
| Convection cold (I) | I ≤ 0.10 | 0.10 ≤ I | 0.15 ≤ I | 0.22 ≤ I | 0.30 ≤ I |
| Contact cold (R) | R ≤ 0.025 | 0.025 ≤ R | 0.050 ≤ R | 0.100 ≤ R | 0.150 ≤ R |
| Water penetration | Penetration | No penetration |
Safety information: The gloves protect against physical and mechanical stress, and against cold temperatures. The protection levels are applicable to the palm of a new, unwashed and non-modified glove. Tested in accordance with the relevant standards. The gloves must
