290

Chemical Protective Gloves nitrile 513

Flexible, durable and elastic. Protects against many kinds of solvents, oils and greases. Suitable for the printing, chemical and food industries.

  • Food-grade approved.
  • Grip with diamond pattern.
  • Flock lined.
  • Made of 0.38 mm nitrile.
  • Length: 310 mm.
  • Green.
  • EN 374 (AJK) and EN 388 (4002).
CE marking:
This product is CE marked in accordance with the directive on personal protective equipment, 89/686/EEC. It conforms to the directive's requirements for innocuousness, comfort and efficacy.

Certification: This product has been constructed and manufactured in accordance with the following standards:
  • EN 374-3:2003 – Resistance to chemical permeation.
  • EN 374-2:2003 – Protection against micro-organism penetration.
  • EN 388:2003 – Gloves for protection against mechanical hazards.

A more detailed description of the gloves' performance level is shown below.

EN 374-3 – Gloves for protection against chemical hazards.
These gloves conform to the requirements for permeation in accordance with EN374-3, with a performance level according to the table.

ChemicalLevel, glovesMax. LevelBreakthrough time
Methanol (A)26>30 min
n-Heptane (J)66>480 min
Sodium hydroxide 50 % (K)66>480 min

EN 374-2 – Gloves for protection against micro-organisms
These gloves conform to the requirements for penetration in accordance with EN 374-2, with a performance level of 2. (Max, level is 3).

EN 388:2003 – Gloves for protection against mechanical hazards.
These gloves comply with EN 388, with a performance level according to the table.

Tested propertyLevel, glovesMax. level
Abrasion resistance44
Cut resistance05
Tear resistance04
Puncture resistance24

Safety Information:
The gloves protect against mechanical and chemical hazards and against microorganisms. The protection levels are applicable to new, unwashed and unmodified gloves. Tested in accordance with the relevant standards. The gloves must not:
  • Come into contact with fire.
  • Be used when there is a risk of entanglement in moving machinery.
The gloves should be stored at normal temperatures and humidity and in a clean, covered and well-ventilated area, out of direct sunlight. Do not wash gloves that have come into contact with chemicals. Chemical protective gloves should not be reused repeatedly. Replace used gloves in good time. Damaged gloves do not provide protection and should be discarded.
  • NITRILE GLOVE 513 MEDIUM

    NITRILE GLOVE 513 MEDIUM

    Art.. 38-2881
    XL
    290
  • NITRILE GLOVE 513 XLARGE

    NITRILE GLOVE 513 XLARGE

    Art.. 38-2883
    M
    290
  • NITRILE GLOVE 513 LARGE

    NITRILE GLOVE 513 LARGE

    Art.. 38-2882
    L
    290
  • NITRILE GLOVE 513 SMALL

    NITRILE GLOVE 513 SMALL

    Art.. 38-2880
    S
    290