990

Welding Gloves

Art.. 38-2998
Durable leather gloves that are heat-, spatter- and spark-resistant. Suitable for MIG/MAG and MMA welding and more. Kevlar seams. EN 12477 Type A. Length: 350 mm. Size: 11.

CE-mark:
This product is CE marked in accordance with the directive on personal protective equipment, 89/686/EEC. It conforms to the directive's requirements for safety, comfort and efficacy.

This product has been constructed and manufactured in accordance with the following standards:
  • EN 12477:2001/A1:2005 – Protective gloves for welders.
Performance:
These gloves comply with EN 12477 Type A, with a performance level according to the table.

Tested PropertyStandard*LevelMax.Min. Type AMin. Type B
Abrasion resistanceEN 3884421
Cut resistanceEN 3881511
Tear resistanceEN 3883421
Puncture resistanceEN 3883421
FlammabilityEN 4074432
Conductive heatEN 4071411
Convective heatEN 407342-
Radiant heatEN 407x4--
Welding sparksEN 4074432
Melted metalEN 407x4--
FlexibilityEN 4201514

*Standard
EN 388 - Protective gloves against mechanical risks.
EN 407 - Protective gloves against thermal risks (heat and/or fire).
EN 420 - Protective gloves - General requirements and testing methods.

Type A indicates that the gloves have a high degree of protection against mechanical and thermal risks, but with less flexibility. This glove type is suitable for most types of welding work e.g. MIG/MAG and MMA. Type A gloves are not suitable for e.g. TIG welding.
Type B indicates that the gloves have a lower degree of protection against mechanical and thermal risks, but have greater flexibility.

Related products