1050

Winter Work Gloves for touchscreens 543

[Missing text '/productpage/payandcollectboxheader' for 'English (Finland)']
[Missing text '/productpage/payandcollectboxtext' for 'English (Finland)']
[Missing text '/productpage/payandcollectreadmoretext' for 'English (Finland)']
Winter gloves with a special material in the tumb, index finger and middle finger that enables communication with a touch screen whilst using the gloves. Elastic spandex with durable PU palm. Open cuff. Elasticised wrists. EN 388 and EN 511.

Technical data:
*Material, back: Spandex*Material, palm: PU*Material, elastic: PolyesterCE-marking:
This product is CE-marked in compliance with the PPE Directive, (EU) 2016/425. It meets the Directive's demands on non-hazardous state, comfort and efficiency.

Approvals:This product is designed and manufactured in compliance with the following standards.*EN 420:2003+A1:2009 – General requirements for Protective Gloves.*EN 388:2016 – Gloves for protection against mechanical hazards.*EN 511:2006 – Gloves for protection against Cold conditions.*The product complies with the limitation regulations in Annex XVII of the European REACH Directive.An in-depth description of the performance levels for the glove is shown below.

EN 388:2016– Gloves for protection against mechanical hazards.
This glove meets the requirements of EN 388, with performance level according to table.

|=Tested property |=Level, glove |=Max. level|Abrasion resistance a) |2 |4|Cut resistance b) |2 |5|Tear resistance c) |2 |4|Puncture resistance d) |1 |4|Cut resistance in compliance with EN ISO13997|X |F

X indicates that the test method is not suitable for the glove's design or material.
Protection level12345 |Abrasion resistance a) |100 |500 |2000 |8000 |- |Cut resistance b) |1.2 |2.5 |5.0 |10.0 |20.0 |Tear resistance c) |10 |25 |50 |75 |- |Puncture resistance d) |20 |60 |100 |150 |-
a) Number of revolutions in sanding machine.
b) Resistance to rotating cutting blades (index).
c) Test sample that can be torn in opposite direction (Newton).
d) Sharp bradawl is pressed against the test sample (Newton).

EN 511:2006 – Gloves for protection against Cold conditions.
These gloves conform to the requirements for contact cold in accordance with EN 511:2006, with a performance level according to the table (X= property not tested).

|=Tested property |=Level, glove |=Max. level|Convection cooling |X |4 |Contact cooling |2 |4 |Water penetration |X |1
Protection level01234 |Convection cooling (I) |I ≤ 0.10 |0.10 ≤ I |0.15 ≤ I |0.22 ≤ I |0.30 ≤ I |Contact cooling (R) |R ≤ 0.025 |0.025 ≤ R |0.050 ≤ R |0.100 ≤ R |0.150 ≤ R |Water penetration |Penetration |No penetration | | |

Safety information: The gloves protect against physical and mechanical stress, and against cold temperatures. The protection levels are applicable to the palm of a new, unwashed and non-modified glove. Tested in accordance with the relevant standards. The gloves must not::
  • Come into contact with fire. *Be used when there is a risk of entanglement in moving machinery.
Wetness can impair insulation performance. The gloves should be stored at normal temperatures and humidity and in a clean, covered and well ventilated area. Damaged gloves do not provide protection and should be discarded
  • WORKING GLOVE 543 SIZE 9

    WORKING GLOVE 543 SIZE 9

    Art. 38-2673
    9
    • Size: 9
    1050
  • WORKING GLOVE 543 SIZE 8

    WORKING GLOVE 543 SIZE 8

    Art. 38-2672
    • Size: 8
    1050
  • WORKING GLOVE 543 SIZE 10

    WORKING GLOVE 543 SIZE 10

    Art. 38-2674
    10
    • Size: 10
    1050

Other customers also bought