Work gloves cutting protection 325
Technical data*Material, glove: Ultra High Molecular Weight Polyethylene (UHMWPE) fibre*Material, coating: Nitrile*Material, elastic:PolyesterCE marking
This product is CE marked in accordance with the Personal Protective Equipment Directive, (EU) 2016/425. It fulfils the directive's requirement for safety, comfort and efficacy.
This product is designed and manufactured in accordance with the following standards.*EN 420:2003+A1:2009 – General requirements for protective gloves.*EN 388:2016– Gloves for protection against mechanical risks.*The product complies with the restriction rules in Annex XVII of the European REACH Regulation.A more detailed description of the performance levels of the glove is shown below.
EN 388:2016 – Gloves for protection against mechanical risks.
This glove meets the requirements of EN 388, with the performance level according to the table.
|Tested property|=Level, glove|=Max. level||Abrasion resistance a) | 4 | 4 ||Cutting resistance b) | 3 | 5 ||Tear resistance c) | 3 | 4 ||Puncture resistance d) | 2 | 4 |Cutting resistance in accordance with EN ISO13997 d)| C| F|
|Protection level|1| 2|3| 4|5||Abrasion resistance a) | 100 | 500 | 2000 | 8000|-||Cutting resistance b) | 1,2 | 2,5 | 5,0 | 10,0 | 20,0 ||Tear resistance c) | 10 | 25 | 50 | 75 |-||Puncture resistance d) | 20 | 60 | 100 | 150 |-|
a) Number of revolutions in sanding machine.
b) Resistance to rotating cutting blades (index).
c) Test sample torn in opposing directions (Newton).
d) Sharp bradawl pressed against the test sample (Newton).
The glove protects against physical and mechanical stress. The protection levels are applicable to the palm of a new, unwashed and non-modified glove. Tested in accordance with the relevant standards. The glove must not:*come into contact with fire.*Be used when there is a risk of entanglement in moving machine parts. The gloves should be stored at normal temperatures and humidity and in a clean, covered and well ventilated area. Damaged gloves do not provide protection and should be discarded.