590

Synthetic gloves

Supple synthetic gloves with hard-wearing nitrile coating. Suitable for installation work and for machine operators. Protection against physical and mechanical stress. The gloves are made from UHMWPE fibre, which is a super-strong and lightweight polyethylene fibre. Conforms to EN 388:2003.

Technical data:
  • Material, gloves: UHMWPE fibre (Ultra High Molecular Weight Polyethylene)
  • Material, coating: Nitrile
  • Material, elastic: Polyester
CE-mark:
This product is CE marked in accordance with the directive on personal protective equipment, 89/686/EEC. It conforms to the directive's requirements for safety, comfort and efficacy.

Certification
This product has been constructed and manufactured in accordance with the following standards:
  • EN 420:2003+A1:2009 – General requirements for protective gloves.
  • EN 388:2003 – Gloves for protection against mechanical hazards.
  • The product complies with the restriction rules in Annex XVII of the European REACH regulations.
A more detailed description of the gloves' performance level is shown below.

EN 388:2003 – Gloves for protection against mechanical hazards.
These gloves comply with EN 388, with a performance level according to the table.

Tested propertyLevel, glovesMax. level
Abrasion resistance a)44
Cut resistance b)35
Tear resistance c)44
Puncture resistance d)34
Protection level12345
Abrasion resistance a)10050020008000-
Cut resistance b)1,22,55,010,020,0
Tear resistance c)10255075-
Puncture resistance d)2060100150-

a) Number of rotations in sanding machine.
b) Resistance to rotating blades (index).
c) Test example torn in opposite direction (Newton).
d) Pressure applied to test example with sharp awl (Newton).

Safety Information:
The gloves protect against physical and mechanical stress. The protection levels are applicable to the palm of a new, unwashed and non-modified glove. Tested in accordance with the relevant standards. The gloves must not:
  • Come into contact with fire.
  • Be used when there is a risk of entanglement in moving machinery. The gloves should be stored at normal temperatures and humidity and in a clean, covered and well ventilated area. Damaged gloves do not provide protection and should be discarded.
  • WORKING GLOVE 328 SIZE 10

    WORKING GLOVE 328 SIZE 10

    Art.. 38-2977
    Sizes: 10
    590
  • WORKING GLOVE 328 SIZE 8

    WORKING GLOVE 328 SIZE 8

    Art.. 38-2975
    Sizes: 8
    590
  • WORKING GLOVE 328 SIZE 9

    WORKING GLOVE 328 SIZE 9

    Art.. 38-2976
    Sizes: 9
    590