Wall and plastering primer
Wall and Plastering Primer is a water-based silicate primer for mineral façades outdoors, and for plastered surfaces indoors where there is a risk of damp. The product is also suitable as a façade impregnation on bricking as well as a dust-binder and bonding primer on concrete flooring. Wall and Plastering Primer is also en effective problem-solver in binding old, chalk-painted floors. Chemical bonding of loosely bound substrate without affecting the diffusion resistance When system painting using Wall and Plastering Primer and overpainted with Wall and Plastering Paint as a topcoat, the result will be a substrate that breathes and that is strongly damp and moisture-resistant.
The substrate shall be clean, dry and solid. Brush or scrape away loose plaster, chalk and paint. Sand and wash previously painted surfaces with Façade and Mould Wash and rinse off with water. Cover any windows as both Façade and Mould Wash and Wall and Plastering Primer have an etching effect on glass. Avoid contact with the eyes. Use safety goggles.
Wall and Plastering Primer is applied over the entire substrate, best using spray applicator with a plant spray or similar device, but a roller or brush can also be used.
Bonding agent: silicate/styrene acrylate