2290
2,29 / L

Red Paint, 10 l

Art.. 37-0000
Water-based distemper paint for exteriors. Fortified with linseed oil. Lead-free. Suitable for new, unplaned wood or for repainting distemper-painted surfaces. Coverage: approx. 3 m²/l. Maintenance intervals: 5-6 years. The paint contains anti-mould and provides good protection against mould build-up. Drying time: approx. 1 h at 20 °C. Store in a frost-free area.

Painting new wood: Prime with diluted red paint (10% water), allow to dry for 24 hours, then apply thin coats of diluted paint until good coverage is obtained.

Painting previously painted surfaces: Clean the exterior of dirt using a broom and steel brush. Remove dust with a soft brush. Then paint with undiluted red paint. Apply thin coats until good coverage is obtained. Cover foundations, drainpipes and windows with protective cardboard or plastic. If there is a risk of mould on the wood, first treat with anti-mould. Use a red paint paintbrush or wall paintbrush and work in the paint in a thin coat. Paint from top to bottom. To ensure good paint coverage on uneven surfaces such as over nail heads, knots or resin-rich areas, it is recommended that these areas are first sanded using coarse sandpaper. In the event of chipping, remove loose material with a steel brush and apply a coat of diluted red paint (10% water). Use water to clean brushes.

NOTE!
Do not paint in direct sunlight in order to prevent the paint from drying too quickly and to prevent chipping. Avoid painting at temperatures lower than +5 °C. Store in a frost-free area.
Safety data sheet available on request. Contains 2-octyl-2H-isothiazol-3-one. May produce an allergic reaction. Contains <name of sensitising substance>. May produce an allergic reaction.
Show safety phrases
Keep out of reach of children. If medical advice is needed, have product container or label at hand.