From
350

Ventilation Pipe Spiro 125 mm

Biltema's Ventilation Piping is a complete spiral-shaped ducting system made from galvanised steel plating. Type-approved in the highest airtightness class (class D) in compliance with EN 12237. All parts are fitted with a sealing ring in EPDM rubber. Compatible with all ventilation systems available on the market.
  • 125MMX2M VENT.SPIRAL DUCT PIPE

    125MMX2M VENT.SPIRAL DUCT PIPE

    Art.. 87-3880
    Pipe Ø 125 mm x 2 m
    1090
  • 125MMDUCT SLEEVE WITHOUTGASKET

    125MMDUCT SLEEVE WITHOUTGASKET

    Art.. 87-3885
    Sleeve Ø 125 mm without rubber seal
    350
  • 125MMX45° BEND. VENT. SPIRAL

    125MMX45° BEND. VENT. SPIRAL

    Art.. 87-3882
    Elbow Ø 125 mm / 45°
    890
  • 125MMX90° BEND. VENT. SPIRAL

    125MMX90° BEND. VENT. SPIRAL

    Art.. 87-3881
    Elbow Ø 125 mm / 90°
    990
  • 125MMX90° T-CONN. VENT. SPIRAL

    125MMX90° T-CONN. VENT. SPIRAL

    Art.. 87-3883
    T-coupling Ø 125 mm/90°
    1290
  • 125MM END CAP VENT.SPIRAL DUCT

    125MM END CAP VENT.SPIRAL DUCT

    Art.. 87-3886
    End cap Ø 125 mm
    390
  • 125MM DUCT SLEEVE WITH GASKET

    125MM DUCT SLEEVE WITH GASKET

    Art.. 87-3884
    Nipple Ø 125 mm with external rubber seal
    390