From
350

Ventilation Pipe 100 mm

Biltema's Ventilation Piping is a complete spiral-shaped ducting system made from galvanised steel plating. Type-approved in the highest airtightness class (class D) in compliance with EN 12237. All parts are fitted with a sealing ring in EPDM rubber. Compatible with all ventilation systems available on the market.
  • 100MMX2M VENT.SPIRAL DUCT PIPE

    100MMX2M VENT.SPIRAL DUCT PIPE

    Art.. 87-3890
    Pipe Ø 100 mm x 2 m
    990
  • 100MM DUCT SLEVE WITH GASKET

    100MM DUCT SLEVE WITH GASKET

    Art.. 87-3895
    Nipple Ø 100 mm with external rubber seal
    390
  • 100MM DUCT SLEVE WITHOUTGASKET

    100MM DUCT SLEVE WITHOUTGASKET

    Art.. 87-3896
    Sleeve Ø 100 mm without rubber seal
    350
  • 100MMX90° T-CONN. VENT. SPIRAL

    100MMX90° T-CONN. VENT. SPIRAL

    Art.. 87-3893
    T-coupling Ø 100 mm / 90°
    990
  • 100MMX90° BEND. VENT. SPIRAL

    100MMX90° BEND. VENT. SPIRAL

    Art.. 87-3891
    Elbow Ø 100 mm / 90°
    690
  • 100MMX45° BEND. VENT. SPIRAL

    100MMX45° BEND. VENT. SPIRAL

    Art.. 87-3892
    Elbow Ø 100 mm / 45°
    590
  • 100MM END CAP VENT.SPIRAL DUCT

    100MM END CAP VENT.SPIRAL DUCT

    Art.. 87-3897
    End cap Ø 100 mm
    390
  • 125X100MM REDUCTION DUCTSPIRAL

    125X100MM REDUCTION DUCTSPIRAL

    Art.. 87-3894
    Reduction Ø 125 mm / Ø 100 mm
    490