590
19,03 / L

Fire mass compound

Art.. 36-429
  • For repair and sealing of cracks and holes in fireplaces, ovens, chimneys, etc.
  • Withstands 1500 ˚C
  • Very good adhesive properties on metal, tiles and cement
  • Expands or does not contract after solidification
  • Good gas resistance
USAGE
  1. The surfaces shall be free of dust, dirt, paint, oil and grease. Porous materials should be moistened carefully with water in order to increase the adhesive property.
  2. Cut off the tip of the cartridge to the desired jointing width. Apply with mastic/putty gun.
  3. If required, spread out the sealant with a putty blade or knife that has been moistened. Immediately wipe off excess compound with a wet rag.
  4. Allow to dry for at least 24 hours. Thereafter increase the unit's temperature in stages. Excessively fast warming can cause cracking in the sealant if it isn't completely dry.
TECHNICAL DATA
Consistency: Black compound
Ingredients: Water glass, kaolin
Density: 1.92 g/cm²
pH: approx 12
Temperature sensitivity: 1500 °C
Application temperature: > 0 °C
Drying time: 24 hours (skins after 5 minutes)
Volume: 310 ml
Danger
May cause damage to organs through prolonged or repeated exposure <or state all organs affected, if known Causes serious eye damage.
Show safety phrases
Dispose of contents/container according to local regulations. Get medical advice/attention if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Wear protective gloves/protective clothing/eye protection/face protection. Keep out of reach of children. If medical advice is needed, have product container or label at hand.