890
Adapter for water temp sensor
Adapter for more easily fitting the sensor to the water temp gauge in the cooling system. You measure the internal diameter of the upper cooling hose. Based on this you select a suitable adapter from our range. Cut off the cooling hose and fit the adapter to it. Use hose clamps of a suitable size. The water temp sensor is then screwed into the applicable hole in the adapter. The 1/8" 27NPT screw thread matches the standard screw thread for sensors and is included in the accessory instrument which also fits the majority of original sensors. If you use a sensor that is earthed, the adapter is fitted with a small screw to affix an earthing cable to. Earth to the engine block or chassis. Material: Anodised aluminium. Colour: Silver.
