1490

Alkyd Paint

Single component alkyd enamel paint, high gloss. For use above the waterline on steel, wood and fibreglass. For both outdoor and indoor environments. Recoatable after 48 hours at + 10 °C. Maximum time for recoating 6 days at + 10 °C and 3 days at + 20 °C. If the maximum time is exceeded, the surface exterior must be matte sanded before a new layer can be applied. Consumption: 11.5m2/litre. Contains 0.75 L.

Instructions for use Apply the paint with a brush, roller or pad. Stir well before use. The surface must be completely dry and clean. The outdoor temperature must not be lower than +5 degrees. Do not paint in bright sunlight, on hot surfaces or in humid conditions. Ensure the area is well-ventilated. Apply 2-3 layers of paint. The amount of thinner required depends on the temperature, ventilation and surface. Use thinner produced for single component alkyd enamel. The brushes should be cleaned with thinner/white spirits.
  • ALKYL ENAMEL RED 0,75L

    ALKYL ENAMEL RED 0,75L

    Art. 30-523
    Red
    1490
    19,87 / L
    Previous price 1499
  • ALKYL ENAMEL GRAY 0,75L

    ALKYL ENAMEL GRAY 0,75L

    Art. 30-522
    Grey
    1490
    19,87 / L
    Previous price 1499
  • ALKYL ENAMEL BLUE 0,75L

    ALKYL ENAMEL BLUE 0,75L

    Art. 30-524
    Blue
    1490
    19,87 / L
  • ALKYD ENAMEL BLACK 0,75L

    ALKYD ENAMEL BLACK 0,75L

    Art. 30-525
    Black
    1490
    19,87 / L
  • ALKYL ENAMEL OFF-WHITE 0,75L

    ALKYL ENAMEL OFF-WHITE 0,75L

    Art. 30-521
    Off-white
    1490
    19,87 / L
    Previous price 1499