1490

Hard anti-fouling paint, biocide free

Biocide-free, hard anti-fouling paint that prevents fouling. For boats in areas with strict environmental requirements, for example inland waterways and the Gulf of Bothnia. For all displacement speeds. Can be painted on fibreglass, wood, steel, and aluminium. Works well in a boat wash.

Instructions: Stir well before use. Existing paintwork in poor condition, or flaky and uneven, and thick residual coats of old paint must be sanded down before applying the anti-fouling paint. If required, first apply a barrier or adhesive coat using sealer. Existing paintwork in good condition should be lightly sanded before applying the anti-fouling paint. If the type of paint used in the existing paintwork is not known, it must be removed. Alternatively, apply a layer of sealer before applying the anti-fouling paint. Bare plastic must be coated with anti-pest epoxy primer. When painting onto epoxy primer, the surface of the primer should be slightly sticky for best adhesion. Epoxy filler must be used on uneven and damaged areas.

Application conditions: The surface must be completely clean and dry. Apply in temperatures above 5 °C. Do not apply in strong sunlight. Ensure good ventilation in enclosed areas during application and drying. The paint can be diluted with thinner if required. The amount of thinner required depends on application conditions such as temperature, ventilation and the surface.

Application: Apply 3 coats of the product 40 micrometres thick to achieve good protection. Use a mohair roller or brush. 

|Temperature: |               10 °C |                    20 °C |                       |Dust dry: |                    8 h |                          4 h |                           |Next coat after: |        9  h  |                       5 h      |                       |Can be launched after:   |    min. 24 h/max. 90 days |    min. 24 h/max. 90 days  |
If the maximum launching time is exceeded, light sanding should be performed prior to launching or any further painting.

Coverage:12.8 m²/l for a 40 micrometre-thick coat
Number of coats:3 coats, 40 micrometres thick
Brush/roller cleaning:Thinning\
  • HARD ANTIFOULING 0,75 BLUE

    HARD ANTIFOULING 0,75 BLUE

    Art. 30-645
    Blue, 0.75 l
    1490
    19,87 / L
    Warning
    Toxic to aquatic life with long lasting effects. May cause drowsiness or dizziness. May cause respiratory irritation. Flammable liquid and vapour. Repeated exposure may cause skin dryness or cracking.
    Show safety phrases
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN: Wash with plenty of soap and water. Wear protective gloves/protective clothing/eye protection/face protection. Avoid release to the environment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep out of reach of children. If medical advice is needed, have product container or label at hand.
  • HARD ANTIFOULING 0,75 BLACK

    HARD ANTIFOULING 0,75 BLACK

    Art. 30-644
    Black, 0.75 l
    1490
    19,87 / L
    Warning
    Toxic to aquatic life with long lasting effects. May cause drowsiness or dizziness. May cause respiratory irritation. Flammable liquid and vapour. Repeated exposure may cause skin dryness or cracking.
    Show safety phrases
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN: Wash with plenty of soap and water. Wear protective gloves/protective clothing/eye protection/face protection. Avoid release to the environment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep out of reach of children. If medical advice is needed, have product container or label at hand.